Name: 124V Air-Cooled Gasoline
Brand: Grasshopper
SKU: 5ac7722ec862580007f4b52e

FEATURES AND BENEFITS

B&S COMMERCIAL TURF ENGINE

724 cc (44.2 cu. in.) Commercial Turf, V-Twin, OHV engine Heavy-duty components enhance power and reliability Five-step, Integrated Cyclonic Air Management System for cleaner performance Extended maintenance intervals Three-year limited commercial engine manufacturer warranty (see dealer for details)

DESIGN-MATCHED TRANSMISSION

Design-matched, fully hydraulic Parker HT Series integrated pump-and-wheel-motor transmissions with in-line cooling fans and fine-particle filtration No power-robbing gearbox or other wear parts for longer service life Provides best-in-class transmission fluid change interval with no break-in period, reducing costs and maintenance time

HEAVY-DUTY DECK

Extra-deep, 5.5-inch deck is fabricated from heavy-gauge formed steel with a reinforced anvil edge Specially designed cutting chambers enhance airflow for better cut quality Deck easily converts from side discharge to optional Down Discharge™ mulching or PowerVac™ collection Sentry™ spindles with massive, 8-inch flanges anchored in a 6-bolt pattern, spread the force of impact for greater strength Spindle planes are fabricated from double-layered formed steel laminate and combine with the spindles to form a triple-strength deck to keep blades level and deliver a high-quality cut Sentry™ spindle guards shield spindle housing and seal lower bearings from fiber wrap and dirt ingestion

QUIKAJUST® DROP PIN HEIGHT ADJUSTMENT

Raise and lower the deck easily with foot pedal and drop pin for precision cutting heights between 1.0 and 5.0 inches.

WARRANTY

Commercial Use: 2-year or 500-hour (whichever comes first); limited warranty covering parts and labor. Residential Use: 4-year or 500-hour (whichever comes first); limited warranty covering parts and labor.

RUGGED CONSTRUCTION

Robotically-welded steel construction for long-lasting durability Centered-bearing design provides greater load-bearing capacity to handle the weight of operator, fuel and high-capacity collector with reserve strength for curb shocks and weight shifts Tough-as-nails powder-coated finish is fusion-bonded for chip and rust resistance

REDUCED MAINTENANCE

Only two Access-Eze™ lubrication points cut maintenance time up to 95% Self-tensioning belts minimize cost and labor on routine maintenance

ULTIMATE OPERATOR STATION®

ComfortZone™ seat eliminates jostles and jolts with coil-spring suspension and a fully padded, high-back seat, padded armrests and variable density foam cushion. Iso-mounting smooths the ride, erases fatigue and keeps the operator comfortably in control at faster mowing speeds

ULTIMATE OPERATOR STATION®

Operational controls including throttle, choke and angled View-Eze™ console and adjustable cup holder are well positioned for visibility and ease of reach

ULTIMATE OPERATOR STATION®

One- or two-handed operation with ComfortReach™ adjustable Hydra-Smooth™ dual levers that automatically return to neutral from either forward or reverse position.

SHOCK IMPACT REDUCTION SYSTEM™ (SIRS™)

Unrivaled comfort with iso-mounted Ultimate Suspension Ride™ scuff-resistant, Cordura®-covered, deep-cushioned, high-back seat with padded lumbar support and armrests Roomy, iso-mounted, shock-absorbing footrest

VIGILANT OPERATOR PRESENCE SYSTEM™

Standard, low profile operator protection structure (OPS) with an adjustable seatbelt Dampened steering levers that return to neutral from forward and reverse Interlock switches that shut down the engine when the operator leaves the seat while PTO is engaged or levers are in drive position

OPTIONS AND ACCESSORIES

4X REAR DISCHARGE DECK

Dedicated 48-inch and larger rear discharge decks throw clippings out back for a smooth cut and no windrowing

QUIKAJUST TILT™ LEVERS

Available for all MidMount models, optional QuikAjust Tilt™ steering levers (except 124V-41) with "no tools" adjustment provide a 9-inch range for maximum comfort and fit while maintaining natural arm and wrist positions..

SIDE DISCHARGE CONTROL KIT

Control the discharge of the mower deck to avoid putting clippings in flower beds and on sidewalks

SUNSHADE CANOPY VINYL

Lightweight, water repellent, UV-resistant vinyl canopy mounts easily to OPS or ROPS to limit exposure to direct sunlight, reducing eye strain and increasing operator comfort.

LED WORK LIGHTS

LED work lights provide improved visibility in low light situations.

FOOT PEDAL EXTENSION KIT

Extends foot pedals to allow easy height control for shorter operators.

YELLOW BEACON LIGHT

Yellow beacon attaches to OPS or ROPS to provide greater visibility in high-traffic areas.

DOWN DISCHARGE™ MULCHING PACKAGE

The optional Down Discharge™ mulching package with GrassMax™ medium-lift blades cuts and recuts clippings and directs them deep into the grass bed, enriching turf and producing a beautifully manicured cut.

POWERVAC® MIDMOUNT COLLECTION SYSTEM

PowerVac™ Collection Systems deliver a clean sweep on every pass. Simply adjust your mowing speed to your conditions. Quik-D-Tatch® Vac drive can be removed in seconds without tools

CUSTOM CORDURA® WEATHER COVER

Weather-resistant, black Cordura fabric cover with embroidered Grasshopper logo keeps seat and engine area protected during storage or between mowings. Slips over ROPS, with Velcro closure to secure the opening.

IMPLEMENTS

Model 8F MidMount™ PowerVac™ Collection System

Model 8HT MidMount™ PowerVac™ Collection System

SPECIFICATIONS

Engine

	41" 124V	48" 124V
Engine Type	B&S Commercial Turf, V-Twin	B&S Commercial Turf, V-Twin
Displacement	44.2 cu. in. (724 cc)	44.2 cu. in. (724 cc)
Lubrication	Pressure Lube/Filter	Pressure Lube/Filter
Crankshaft	Vertical	Vertical
Engine Cooling	Air	Air
Fuel Type	Gasoline - unleaded	Gasoline - unleaded
Fuel Capacity	3 U.S. Gal. (11.4 l)	6.5 U.S. Gal. (24.6 l)
Optional Fuel Capacity	NA	NA
Air Cleaner	Integrated, cyclonic air cleaner with 5-step debris management system	Integrated, cyclonic air cleaner with 5-step debris management system
Muffler	Ultra quiet, single, industrial type.	Ultra quiet, single, industrial type.

DuraMax Decks

	41" 124V	48" 124V
DuraMax® Deck	NA	NA
Mulch Kit #	504548	504551
Deck Size	41"	48"
Cutting Height Range	1.0 to 5.0 in. (2.5 to 12.7 cm)	1.0 to 5.0 in. (2.5 to 12.7 cm)
Deck Construction	Double-layered 10-gauge plus 10-gauge formed-steel spindle plane 0.269 in (6.83 mm) thick with 7-gauge skirts.	Double-layered 10-gauge plus 10-gauge formed-steel spindle plane 0.269 in (6.83 mm) thick with 7-gauge skirts. Anvil-edge design with 0.5 in, (12.7 mm) reinforcement on front edge of deck.
Deck Blades	(2) 21 in. (53.5 cm)	(2) 18 in. (45.7 cm) (1) 15 in. (38.1 cm)
Deck Spindles	Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable.	Sentry™ Spindle System, 2.5 cm (approx. 1 in.) O.D. shaft. Spindle head designed to eliminate fiber wrap. Double bearings, non-greasable.
Spindle Housing	8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.	8 in. (20.3 cm)-diameter machined aluminum housing with 6-bolt pattern.
Blade Drive	Belt drive with single Kevlar V-belt and idler arm tensioning.	Belt drive with single Kevlar V-belt and idler arm tensioning.
Deck Trimability	NA	NA

Starter & Electrical System

	41" 124V	48" 124V
Battery	12 Volt	12 Volt
Starter	Solenoid shift	Solenoid shift
Ignition	Breakerless	Breakerless
Interlock System	Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.	Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.

Ultimate Operator Station

	41" 124V	48" 124V
Operator Seat	Ultimate Suspension Ride (USR) deep-cushioned, high-back, foam-padded, scuff-resistant CoolTemp Cordura®-covered with padded lumbar support and armrests.	Ultimate Suspension Ride (USR) deep-cushioned, high-back, foam-padded, scuff-resistant CoolTemp Cordura®-covered with padded lumbar support and armrests.
Suspension	Roomy, iso-mounted footrest with Shock Impact Reduction System™ (SIRS™).	Roomy, iso-mounted footrest with Shock Impact Reduction System™ (SIRS™).
Console-mounted Instruments	Digital hour meter, parking brake indicator light, ignition switch, choke and push/pull PTO switch.	Digital hour meter, parking brake indicator light, ignition switch, choke and push/pull PTO switch.
Work Lights	Optional - LED	Optional - LED
Hour Meter	Standard	Standard

Transmission & Steering

	41" 124V	48" 124V
Transmission Type	Design-matched hydrostatic system with in-line cooling fans. Fully hydraulic, integrated Parker HT Series transmission with variable displacement piston-type pumps and high-torque wheel motors for each drive wheel.	Design-matched hydrostatic system with in-line cooling fans. Fully hydraulic, integrated Parker HT Series transmission with variable displacement piston-type pumps and high-torque wheel motors for each drive wheel.
Transmission Filtration	Internal field-serviceable filter / No break-in oil change required; best-in-class service intervals with CoolTemp Hydro-Max™ fluid.	Internal field-serviceable filter / No break-in oil change required; best-in-class service intervals with CoolTemp Hydro-Max™ fluid.
Speeds	0 - 7.5 mph (0 - 12.1 kph) forward 0 - 5.5 mph (0 - 8.9 kph) reverse	0 - 8.0 mph (0 - 12.9 kph) forward 0 - 6.0 mph (0 - 9.7 kph) reverse
Turning Radius	True zero degree, turns within own length with counter-rotating, independently powered drive wheels.	True zero degree, turns within own length with counter-rotating, independently powered drive wheels.
Steering	One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.	One- or two-hand operation with adjustable HydraSmooth™ dual levers that automatically return to neutral from either forward or reverse position.
Brakes	Dynamic braking through hydrostatic transmission.	Dynamic braking through hydrostatic transmission.
Parking Brake	Compression	Compression
Attachment Drive	NA	NA

Tire Sizes

	41" 124V	48" 124V
Standard Midmount Drivetire	20x10x8 turf, 4-ply rated	20x10x10 turf, 4-ply rated
Optional MidMount™Drive Tires	NA	NA
MidMount™ Front Caster Wheels	13x5.00x6; pneumatic with greasable, double-sealed bearings to protect from grass wrap.	13x6.50x6; pneumatic with greasable, double-sealed bearings to protect from grass wrap.
Standard FrontMount™ Drive Tire	NA	NA
Optional FrontMount™ Drive Tire	NA	NA
FrontMount™ Single Frok Tail Wheel Size	NA	NA
FrontMount™ Wide Stance Single Fork Tail Wheel Size	NA	NA
FrontMount Deck Tire

Dimensions

	41" 124V	48" 124V
Height, Seatback	46.0 in. (116.9 cm) (41), 47.0 in. (119.4 cm) (48)	46.0 in. (116.9 cm) (41), 47.0 in. (119.4 cm) (48)
Height Seat Cushion	28.0 in. (71.1 cm) (41), 29.0 in. (73.7 cm) (48)	28.0 in. (71.1 cm) (41), 29.0 in. (73.7 cm) (48)
Height ROPS	57.5 in. (146.1 cm) (41), 59.0 in. (149.9 cm)(48)	57.5 in. (146.1 cm) (41), 59.0 in. (149.9 cm)(48)
Mower+Deck Length	76.0 in. (193.0 cm)	75.0 in. (190.5 cm)
Mower+Deck - Deck Folded
Deck Width - Side Discharge	54.5 in.* (138.4 cm)	61.5 in. (156.2 cm)
Deck Width - Side Discharge 41"	54.5 in.* (138.4 cm)	54.5 in.* (138.4 cm)
Deck Width - Side Discharge 42"	NA	NA
Deck Width - Side Discharge 48"	61.5 in. (156.2 cm)	61.5 in. (156.2 cm)
Deck Width - Side Discharge 52"	NA	NA
Deck Width - Side Discharge 61"	NA	NA
Deck Width - Side Discharge 72"	NA	NA
Deck Width - Mulching	42.5 in.* (108.0 cm)	49.5 in.* (125.7 cm)
FrontMount™ Width	NA	NA
FrontMount™ Wheelbase	NA	NA

Weight

	41" 124V	48" 124V
Weight Power Unit+Deck (uncrated)	700 lbs. (317.5 kg)	810 lbs. (367.5 kg)
Weight FrontMount™ Power Unit only	NA	NA
Weight Mower Deck
Weight Mulch Kit	17 lbs. (7.7 kg)	25 lbs. (11.3 kg)